Liquid error: Error in tag 'section' - 'product-template' is not a valid section type

KwikSafety TSUNAMI KIT | 1D Safety Harness, Vertical Lifeline, Tool Lanyard

Sold out
$ 129.99
$ 114.99

VERTICAL LIFELINE | The Lifeline is A 50 ft black and yellow braided Polyamide rope that protects it from dirt and UV rays. The outer braided layer makes it more resistant to abrasion than conventional twisted rope. It comes with a hardened plastic thimble to further protect the rope and has stitched eye terminations giving it extra strength. It has a weight limit of 310 lbs (One (1) person with equipment) and the Snap hook is rated for 5,000 lbs.

SAFETY HARNESS | The Tornado Full Body Safety Harness has one (1) Dorsal Ring that is located on the back of the Harness and is the primary fall arrester attachment. It can also be used for restraint and rescue. During a fall, our FBH directs the load through the shoulder straps and around the thighs. If a fall were to occur, the FBH will bring you to an upright position with a slight lean to the front. Some pressure may occur on the lower chest. It has a weight limit of 310lbs.

DRY BAG AND TOOL LANYARD| The waterproof Dry Bag protects your tools from the weather. It works as a carry bag for your gear including: tools, lanyard, nail gun, boots, glasses, hammer, and roofing equipment. The Tentacle tool lanyard is designed for light duty uses; hand tools and smaller power tools. The anodized aluminum carabiner (does not rust!) is an easy quick snap clip. Third party tested to a max capacity of 20 lbs, resting length is 3ft and activated length is 5 ft.

USE & ACTIVITIES | Can be used for climbing on a roof, roofing, gutter cleaning, installation, on steep roofs, inspection, maintenance, demolition, confined space and emergency rescue, chimneys, wind turbines, communication towers, water tanks, wells, ship yards, decking operations, window washing, and climbing ladders. Used by iron & steel workers, roofers, emergency personnel, construction workers, engineers, inspectors, supervisors, technicians, woodcraft worker, industrial painter.

ANSI & OSHA COMPLIANT | The Lifeline, as well as the different parts that make it up have undergone the Qualification and Verification testing for fall protection. The Vertical Lifeline is compliant with ANSI/ASSE z.359.15-2014. The Tornado harness is compliant with ANSI/ASSE Z359.11-2014. The Rope is compliant with ANSI Z359.12, and the snaphook is compliant with ANSI Z359.12-2009 and CSA Standard Z.259.12-16. The lanyard has a durable bungee strap with a cord stopper with a durable rubber base to secure tools.